Latest Milesight Firmware for NVRs and Cameras

Latest Firmware for and Cameras, Milesight have recently released for all of their NVRs and cameras. The latest firmware updates can be downloaded here from their Download Centre

The Release Notes are below:

Firmware for cameras:
.

 Support to adjust the sensitivity of Day/Night on 180¡ã Panoramic Mini Bullet and New Mini Bullet;
 Support to display “Sum” and “Capacity” of People Counting;
 Support to save LPR snapshot into SD card;
 Optimze the memory reclaims;
 Fix the problem that the PTZ Bullet Camera fails to tilt down when using 3D positioning function;
 Fix the problem that you may fail to login after to version 4X.7.0.73 IP parameters changed;
 Fix the problem that Auto Tracking still works without setting the Schedule;
 Fix other bugs.

Firmware for NVRs:
.

 New feature: Private HDD in Storage->Disk->Edit.
 Fix APP message push issue;
 Fix Loss failed sending email issue;
 Fix the VCA track missing issue on live view of local display;
 Optimise the prompt for 3rd party Motion Detection;
 Effective time and action settings changed to be configurable even when motion detection is disabled;
 Milesight Fisheye camera 4R mode Motion detection limit;
 Security upgrade for TLSV1.2

 Milesight have just this week released a new NVR firmware, 7x.9.0.2 introduces support for VCA functions which means that you can now control the VCA/Smart Event settings of your Milesight cameras from the NVR.

You can read a little bit more about this new feature here

 1543486305788.png

IMPORTANT: Before updating to 7x.9.0.2 you will need to make sure your NVR has been updated to the new file system (firmware version 7x.8.45.7), so:

 1. If the NVR is on a firmware version older than 7X.8.45.7 – you will have to upgrade to 7X.8.45.7 first and then upgrade to 7X.9.0.2 (or above in future), after you update it will display in the NVR settings as version 7X.9.45.2 instead of 9.0.2 this is just to signify that it is firmware for our UI- model NVRs

2. If the NVR is already on firmware version 7X.8.45.7 – you can just upgrade straight to 7x.9.0.2 (or above in future), after you update the firmware will display in the settings as 7X.9.45.2 as mentioned above

 If you need to update to the new file system you can find the 7x.8.45.7 firmware to do that here

Once you have updated to the new file system you can find the new 7x.9.0.2 firmware at 
Milesight's download page71.9.0.2 – 5032, all 7000 series and all 8000 series NVRs
72.9.0.2 – 1009 and 5016 NVRs
 You may also notice on the download page that there is a new r14 camera firmware, the new VCA update is compatible with the cameras, NVR, and CMS so for the cameras and NVR or cameras and CMS to work together and give you control of the VCA features they all have to be on below firmware versions (or above in future):
 Camera: 4X.7.0.67-r14
NVR: 7X.9.0.2
CMS: 2.4.0.2​

.

Latest Milesight Firmware for NVRs and Cameras

Read More : How to Upgrade Firmware for Milesight NVR IP Camera

Firmware Download

.

Camera Software Version: (31.x.x.x)

31.8.0.3-r3

2023-05-31

84.6M

.

Camera Software Version: (32.x.x.x)

32.8.0.3-r3

2023-05-31

69.8M

.

Camera Software Version: (33.x.x.x)

33.8.0.3-r3

2023-05-31

58.2M

.

Camera Software Version: (45.x.x.x)

45.8.0.3-r3

2023-05-31

85.8M

.

Camera Software Version: (40/41.x.x.x)

40.7.0.80-r2

2023-05-31

31.7M

.

Camera Software Version: (43.x.x.x)

43.7.0.80-r2

2023-05-31

33.5M

.

Camera Software Version: (51.x.x.x)

51.7.0.77-r4

2023-11-09

40.1M

.

Camera Software Version: (61.x.x.x)

61.8.0.3-r9

2023-09-21

73.2M

.

Intelligent Traffic CameraT_45.X.X.XX

T_45.8.0.3_AM-r8

2024-01-02

75.4M

.

Intelligent Traffic CameraT_45.X.X.XX

T_45.8.0.3_ME-r8

2024-01-02

68.7M

.

Intelligent Traffic CameraT_45.X.X.XX

T_45.8.0.3_EU-r8

2024-01-02

70.2M

.

Intelligent Traffic CameraT_45.X.X.XX

T_45.8.0.3_AP-r8

2024-01-02

97.1M

.

4K/H.265 Series NVR (MS-NxxxxNxE)

78.9.0.19

2023-12-21

59.1M

.

4K/H.265 Series NVR (MS-NxxxxxxG)

77.9.0.19

2023-12-21

67.4M

.

4K/H.265 Series NVR (MS-NxxxxxxE)

75.9.0.19

2023-12-21

56.2M

.

4K/H.265 Series NVR (MS-NxxxxxxT)

72.9.0.19

2023-12-21

62M

.

4K/H.265 Series NVR (MS-NxxxxxxH)

71.9.0.19

2023-12-21

64.2M

.

4K/H.265 Series NVR (MS-NxxxxxxC)

73.9.0.19

2023-12-21

54.9M

.

Intelligent Traffic CameraT_61.X.X.XX

T_61.8.0.3_USA-r9

2023-11-27

93.75M

.

Intelligent Traffic CameraT_61.X.X.XX

T_61.8.0.3_ME-r9

2023-11-27

94.3M

.

Intelligent Traffic CameraT_61.X.X.XX

T_61.8.0.3_EU-r9

2023-11-27

83.95M

.

Intelligent Traffic CameraT_61.X.X.XX

T_61.8.0.3_AP-r9

2023-11-27

136.4M

.

Intelligent Traffic CameraT_61.X.X.XX

T_61.8.0.3_AM-r9

2023-11-27

102.1M

.

4G Solar-powered Traffic Sensing CameraC_21.1.0.6-r2

C_21.1.0.6-r2

2023-11-23

23.1M

.

Indoor Parking Guidance CameraPI_61.8.0.3

PI_61.8.0.3_ME-r1

2023-08-30

75.8M

.

Indoor Parking Guidance CameraPI_61.8.0.3

PI_61.8.0.3_EU-r1

2023-08-30

74.4M

.

Indoor Parking Guidance CameraPI_61.8.0.3

PI_61.8.0.3_AP-r1

2023-08-30

101.1M

.

Indoor Parking Guidance CameraPI_61.8.0.3

PI_61.8.0.3_AM-r1

2023-08-30

81.3M

.

Outdoor Parking ManagementPO_45.X.X.XX

PO_45.8.0.3_ME-r6

2023-06-16

93M

.

Outdoor Parking ManagementPO_45.X.X.XX

PO_45.8.0.3_EU-r6

2023-06-16

90.8M

.

Outdoor Parking ManagementPO_45.X.X.XX

PO_45.8.0.3_AP-r6

2023-06-16

125M

.

Outdoor Parking ManagementPO_45.X.X.XX

PO_45.8.0.3_AM-r6

2023-06-16

98.5M

.

How to Upgrade Firmware for IP Camera

1. Choose Firmware

https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/69029779636/original/SU9Ay8-qRQGTlBDeOGLgr6dzc2ze6A1dqw.png?1649928567

Note:

1) Firmwares 10.5.0.110-r11 and 20.5.0.110-r11 are separately used for cameras MS-C2XXX and MS-3XXX which are without -A or -B in the model names, such as MS-C2182-P and MS-C3366-FPN;

2) Firmware 30.7.0.63-r20 is used for cameras with -A in the model names including MS-C2XXX-A and MS-3XXX-A, such as MS-C2182-PA and MS-C3366-FPNA;

3) Firmware 40.7.0.XX is used for cameras which use the firmware that the prefix of version number is 40 or 41;

4) Firmware 42.7.0.XX is used for cameras which use the firmware that the prefix of version number is 42 (For earlier MS-C8262-F(I)PB and MS-C9674-PB);

5) Firmware 43.7.0.XX is used for cameras which use the firmware that the prefix of version number is 43 (For MS-C8262-F(I)PB and MS-C9674-PB );

6) Firmware 43.7.0.XX -LPRX is used for LPR cameras which use the firmware that the suffix of version number is LPRX, such as LPR1, LPR2,LPR3;

7) If failed to get the upgrade firmware by clicking the link directly , please copy the link to browser manually;

8) To ensure that the firmware is fully available, the downloaded file will be a compressed package. Please manually extract it before importing to the File Path.

2. Key Steps after Downloading the Firmware

If the firmware you downloaded is 30.7.0.XX or 4X.7.0.XX, you can skip this part and directly go to 3.Upgrade Steps, otherwise please read below steps carefully.

Step1: If the current firmware version of your camera is above XX.5.0.85, like 10.5.0.89 or 20.5.0.90, you can go to 3.Upgrade Steps and upgrade your camera directly;

Step2: If the current firmware version of your camera is below XX.5.0.85, like 10.5.0.73 or 20.5.0.80, you should change the name of the firmware you downloaded according to the table below;

Camera model and firmware

Take MS-C2651-PM for example:

Step1: According to the table above, it matches with MS-C2XXX, so we should download MSFImage_10.5.0.110_896a6b5b first.

Step2:

1) Suppose that the firmware version of this camera is XX.5.0.87 before upgrading, we can directly upgrade it according to 3.Upgrade Steps;

2) Suppose that the firmware version of this camera is XX.5.0.79, we should change the name of the firmware we downloaded. According to Table2, MS-C2651-PM belongs to model MS-C26XX and matches with 11.X.X.XX. So we need to change

 MSFImage_10.5.0.110-r11_2e653e10 into MSFImage_11.5.0.110-r11_2e653e10

3. Upgrade Steps

Please check each model with right firmware version as mentioned above , then upgrade the firmware according to the following steps:

Step1: Go to the web of IP Camera, click “Configuration” -> “Maintenance” -> “Upgrade Firmware”

Upgrade Steps

Step2: Browse and select files for the upgrade.

Step3: Click the “Upgrade” button and a progress bar will pop up, wait for about 1-3 minutes until it reaches 100%. After that, the system will reboot, and the firmware upgrade successfully.

Upgrade Steps

Latest Milesight Firmware for NVRs and Cameras

Step4: Use Milesight to search out this camera according to its MAC address, and then change its IP into your local IP address. (The IP address will be kept after upgrading if the firmware versions are after XX.4.0.52).

You can also use Smart Tools to download the latest firmware.

“IPC Tools”-“Upgrade”-“Firmware Online”

Upgrade Steps

The link for Smart Tools:

http://www.milesight.com/DownloadFile/Software/Smart_Tools/Milesight_Smart Tools_Setup.zip

Note:

1) If the current firmware version of the camera is below 10.5.0.73 and 20.5.0.73, like 10.5.0.68 or 20.4.0.51, please reboot the camera and restore it into settings via web before upgrading.

2) For the new version, you may need to re- the ActiveX. During the installation, please close the browser, otherwise the ActiveX may not be installed correctly.

3) Please clear the cookies first after re-installing the new ActiveX(Press Shift+Ctrl+Delete to quick call the clear cookies windows).

.

1 thought on “Latest Milesight Firmware for NVRs and Cameras”

  1. Hello. Help me please. I buy ip wifi camera anbiux wp605-b f4w, but this camera not work with icsee app and I want replace firmware. Thank you.
    Добрый день, помогите пожалуйста, я приобрёл камеру anbiux wp605-b f4, но она не работает в приложении icsee и я хотел бы её перепрошить. Благодарю.

    Reply

Leave a Comment