Updating your Wyze Cam firmware version When your Wyze Cam has a firmware update, you'll be prompted to update in the Wyze app. But you can also check and update your firmware manually.
What you’ll need:
- Wyze's webcam firmware
- A 32 GB microSD card (recommended)
- Wyze Cam v2 or Wyze Cam Pan
- A USB A to A cable*
*If you have a USB C to A cable, it may work. Follow the instructions below; if you have issues, switch to a USB A to A cable.
Before you start:
- Wyze Cam v2 (and Pan) were not designed to be used as a webcam. This firmware is for folks who need a webcam but can't buy one.
- This solution should be used “as is.” We are not planning on continuous improvements or bug fixes.
- Once the Wyze Cam is flashed to webcam firmware, it will not be able to connect to the Wyze app, unless you manually flash it back to stock firmware.
- This may or may not be compatible with your computer operating system. We have tested and confirmed that it works on Mac OS 10.13, Windows 7 and 10.
- This solution has been tested and works with Zoom, GoToMeeting, Blue Jeans, Google Hangouts, Skype, and Cisco.
What we know:
- The webcam video, speaker, and mic all function properly.
- Mic audio may be low. We suggest you set your audio level to medium, or use your own microphone and speaker.
How to flash your Wyze Cam to a webcam:
- Insert the microSD card into your computer.
- download the webcam's special firmware here.
- Windows 10: Right-click on the file “V2Webcam.zip” or “PanWebcam.zip” and select Extract all to your desktop. Drag and drop the “demo.bin” file on the root directory of your microSD card.
- Mac OS: Click on the file “V2Webcam.zip” or “PanWebcam.zip”. Drag and drop the “demo.bin” file on the root directory of your microSD card.
- Eject and remove the microSD card from your computer.
- Unplug the Wyze Cam from the power source (ex. the end attached to the wall socket).
- Insert your microSD card into the bottom of the camera.
- Press and hold the setup button, then plug your Wyze Cam back into the power source.
- Continue holding the setup button for 3-6 seconds until the light is solid blue, then release the button.
- Note: The “Solid Blue” in this case is not the same as the one normally seen on the camera. Instead, both the blue and yellow LEDs will be on at once, appearing as a lighter blue.
- Wait 3-4 minutes.
- The camera will reboot, and the light status will change during this time.
- Once complete, the status light will flash yellow and blue at the same time (not alternating).
Wyze Cam will continue to flash yellow and blue at the same time if the webcam firmware is installed properly and the camera is turned on.
To use your new webcam:
- Connect the USB A to A cable to the Wyze Cam USB port and the computer USB port.
- In your video conference tool (ex. Zoom), change the camera source to “HD USB Camera.”
- We recommend you use a different source for the speaker and microphone functions.
Release Notes & Firmware
To update the Wyze app, go to the Google Play Store or the Apple App Store to download the update. Click here to learn more about updating the Wyze app and checking which version you have installed.
Learn more about how to update a device's firmware by clicking here.
Wyze Video Doorbell Pro Firmware
1.0.64 (March 30, 2022)
- Added support for default Quick Responses
- Added support for motion detection zones
- Increased detection sensitivity to 5 levels
- The doorbell will now sleep if the live stream is left on for more than 20 minutes when using the battery
- Optimized Event uploading logic
1.0.62 (February 23, 2022)
- Audio from both sides of the conversation will be recorded instead of only the doorbell side
- Improved echo cancellation to reduce noise when using 2-way audio
1.0.60 (February 14, 2022)
- Ringing the doorbell is no longer included in motion detection cooldown
- The default motion detection sensitivity for newly paired doorbells is now set to medium
- Fixed a bug that caused some Events to fail uploading
- Fixed a bug that kept the doorbell constantly active
1.0.58 (January 4, 2022)
Added more tones
Improved Event triggers
Fixed a battery indicator bug
Wyze Buds Pro Firmware
0.6.6.0 (November 3, 2021)
- Added a Noise Cancellation Off option for touch control
- Improved battery measurement accuracy
- Improved an issue that caused occasional reboots on certain phone models
- Fixed a bug that caused the right earbud to turn noise cancellation off
0.6.5.2 (August 26, 2021)
- Added additional case battery percentage syncing to fix a bug that prevented the case battery from displaying
- Improved Bluetooth connection
- Sped up the buds startup process
- Updated the default volume so it is not too loud
- Improved touch control recognition for triple tapping
- Fixed a bug that caused the low battery level voice prompt to occur twice
Wyze Buds Firmware
0.0.3.18 (October 25, 2021)
- Added support for switching between devices by long-tapping both earbuds